Audiovox VOH1042DL Owners Manual - Page 14

Troubleshooting, Specifications

Page 14 highlights

Troubleshooting PROBLEM Poor TV Reception Poor radio reception (FM modulator installed) IR sensor inoperative SOLUTION • Perform auto programming of the tuner • Verify antenna condition. • NOTE: Due to the nature of TV signals, vehicle motion, direction the vehicle is facing, distance from the transmitter, nearby surroundings and weather may adversely affect TV reception. These conditions may result in the following: picture roll, "snowy" picture, or momentary loss of color. Please refer to page 2 for more information on TV reception. • Check the condition of the vehicle's radio antenna. • Verify that the antenna is fully raised • If a wired RF modulator has been installed, verify that it's switch is turned to the off position • Verify that the batteries in the remote are fresh • Verify that the remote eye is not obstructed. • Verify that the infrared transmitter is affixed over the sensor eye of the component to be controlled Specifications LCD Brightness Resolution SVGA 300 nits (min) 800 x 600 Operation Temperature -10 ~ 65º C Storage Temperature - 40 ~ 85º C Video Display System NTSC Audio Output 1W @ 16Ω Current Draw 2A Weight 5.3 Lbs Overall Dimensions 2.2 x 11 x 11.2 Inch (H x W x D) -13-

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

Troubleshooting
PROBLEM
SOLUTION
Poor TV Reception
Perform auto programming of
the tuner
Verify antenna condition.
NOTE: Due to the nature of TV
signals,
vehicle
motion,
direction the vehicle is facing,
distance from the transmitter,
nearby
surroundings
and
weather may adversely affect
TV
reception.
These
conditions may result in the
following: picture roll, “snowy”
picture, or momentary loss of
color. Please refer to page 2
for more information on TV
reception.
Poor radio reception (FM
modulator installed)
Check the condition of the
vehicle’s radio antenna.
Verify that the antenna is fully
raised
If a wired RF modulator has
been installed, verify that it’s
switch is turned to the off
position
IR sensor inoperative
Verify that the batteries in the
remote are fresh
Verify that the remote eye is
not obstructed.
Verify
that
the
infrared
transmitter is affixed over the
sensor eye of the component
to be controlled
Specifications
LCD Brightness
300 nits (min)
Resolution SVGA
800 x 600
Operation Temperature
-10 ~ 65º C
Storage Temperature
- 40 ~ 85º C
Video Display System
NTSC
Audio Output
1W @ 16
Current Draw
2A
Weight
5.3 Lbs
Overall Dimensions
2.2 x 11 x 11.2 Inch
(H x W x D)
-13-