Audiovox XMCK10 User Guide - Page 14

FM Frequency - xm

Get Audiovox XMCK10 - XM Radio Tuner PDF manuals and user guides
UPC - 044476030666
View all Audiovox XMCK10 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

FM Frequency The following Frequency Setting adjustments are possible: NOTE:The Xpress XM7 unit has an internal wireless FM transmitter, which allows you to play the audio through any standard FM receiver, eliminating the need for hardwire connections. In certain urban areas of the country where strong FM stations may overpower the Xpress XM7 unit FM transmitted signal, an FM direct adapter may be needed to achieve a clean audio signal (Part Number XMFM-1) FM ON or OFF Feature This feature allows the user to turn the FM Transmitter ON or OFF. It is recommended that you turn the FM Transmitter OFF if you are using the low level audio outputs in your particular application (optional cable needed SAT-RCA) (see Figure 7). Upon entering the "FM Frequency" mode the FM transmitter will be OFF by default. To turn the FM Transmitter ON, turn the Rotary/Select knob CW/CCW or use the UP and DOWN buttons on the Remote Control to the highlight the desired frequency (88.1, 88.3, 88.5,.......107.9). Figure 7. FM OFF Screen The selected frequency must be an unused frequency or a frequency used by a low powered FM station in your area. If not, the strong signal from the FM station may overpower the Xpress XM7 unit FM transmitted signal which may result in interference. With the FM Frequency highlighted, press the Rotary/Select Knob or the (XM) Select button on the remote control to confirm the selection (see Figure 8). -14- Figure 8. FM Frequency Screen

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
-
14
-
FM Frequency
The following Frequency Setting adjustments are possible:
NOTE:
The Xpress
XM
7
unit has an internal wireless FM trans-
mitter, which allows you to play the audio through any standard
FM receiver, eliminating the need for hardwire connections. In
certain urban areas of the country where strong FM stations
may overpower the Xpress
XM
7
unit FM transmitted signal, an
FM direct adapter may be needed to achieve a clean audio
signal (Part Number XMFM-1)
FM ON or OFF Feature
This feature allows the user to turn the FM Transmitter ON or
OFF.
It is recommended that you turn the FM Transmitter OFF if
you are using the low level audio outputs in your particular
application (optional cable needed SAT-RCA) (see Figure 7).
Upon entering the “FM Frequency” mode the FM transmitter will
be OFF by default.
To turn the FM Transmitter ON, turn the
Rotary/Select knob CW/CCW or use the UP and DOWN buttons
on the Remote Control to the highlight the desired frequency
(88.1, 88.3, 88.5,
.......
107.9).
Figure 7. FM OFF Screen
The selected frequency must be an unused frequency or a
frequency used by a low powered FM station in your area. If
not, the strong signal from the FM station may overpower the
Xpress XM
7
unit FM transmitted signal which may result in
interference.
With the FM Frequency highlighted, press the Rotary/Select
Knob or the (XM) Select button on the remote control to confirm
the selection (see Figure 8).
Figure 8. FM Frequency Screen