Audiovox XMCK10 User Guide - Page 16

NOTE: To prevent distortion caused by overdriving the audio playback device input, it is recommended that you adjust the audio level signal to mid-range. Screen displayed when the FM Frequency is set to OFF Antenna Aiming (Home Installation) This feature allows the user to aim the antenna to optimize XM7 signal reception (see Figure 11). Upon entering the antenna aiming mode, a horizontal bar graph is displayed with a minus (-) sign on the left and a plus (+) on the right. The horizontal bar graphs represent the repeater signal and satellite transmission signal strength. Position the antenna to optimize either the satellite or terrestrial signal. When the optimal setting is achieved, press the Menu button on the unit or the Menu on the Remote Control to exit this screen and to return to the main menu. NOTE: When the Antenna Aiming screen is selected, this screen does not time-out like the other menu screens. This screen will stay active until the Menu Button is pressed again. Screen displayed when a FM Transmitter is set to "ON". Figure 10. Audio Level Screen Satellite Signal Level Terrestrial Signal Level -16- W eak Strong Figure 11. Antenna Aiming Screen