Avanti DG201BS Instruction Manual - Page 16
Maintenance, Burners, Grids, Correct, Replacement, Shelf, Installation, Removal, Removable, Storage
View all Avanti DG201BS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
CARE & MAINTENANCE BURNERS AND GRIDS These parts can be removed and cleaned with appropriate products. After cleaning, the burners and their flame distributors must be well dried and correctly replaced. It is very important to check that the burner flame distributor and the cap has been correctly positioned - failure to do so can cause serious problems. In appliances with electric ignition keep the electrode clean so that the sparks always strike. Note: To avoid damage to the electric ignition do not use it when the burners are not in place. CORRECT REPLACEMENT OF THE BURNERS It is very important to check that the burner flame spreader "F" and the cap "C" have been correctly positioned (see figs. 20 and 21). Failure to do so can cause serious problems. In appliances with electric ignition, check that the electrode "S" (fig. 20) is always clean to ensure trouble-free sparking. The ignition plug must be very carefully cleaned. OVEN SHELF INSTALLATION AND REMOVAL The oven shelves are provided with a security block to prevent accidental extraction. They must be inserted operating as per figure 22. To pull them out remove shelf in the inverse order. Keep attention to insert the shelves correctly (see side figure). Figure 20 C - 0 Figure 22 Safety catch •-• OVEN DOOR The internal glass of the oven door can be easily removed for cleaning by unscrewing the two lateral fixing screws (fig. 23). Figure 23 REMOVABLE STORAGE DRAWER The drawer (fig. 24) comes out like a normal drawer. To remove the drawer open and lift it. Do not store flammable material in the oven or in the bottom drawer. 16 Figure 21 Figure 24