Avanti DG201BS Instruction Manual - Page 17
completely
View all Avanti DG201BS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
CARE & MAINTENANCE REMOVING THE OVEN DOOR Type A To facilitate oven cleaning, it is possible to remove the door. Please follow the instructions carefully: - Open the door completely. - Push down the lever "L" and, keeping it in this position, slowly close the door in order to block the hinge (fig. 25a). - Grip the door (as indicated in fig. 25b) and, while closing it, release the two hinges as shown in fig. 25c. - Rest the door on a soft surface. DOOR ASSEMBLY - Grip the door with your hands placed near the hinges and raise the levers "H" with your forefingers (fig. 25c) - Insert the hinges in their position until levers "H" are hooked. - Open the door completely to obtain the release of levers "L". Figure 25b Figure 25a o Figure 25c H e O 00 REMOVING THE OVEN DOOR Type B The oven door can easily be removed as follows: - Open the door to the full extent (fig. 26a). - Attach the retaining rings to the hooks on the left and right hinges (fig. 26b). - Hold the door as shown in fig. 26. - Gently close the door and withdraw the lower hinge pins from their location (fig. 26c). - Withdraw the upper hinge pins from their location (fig. 26d). - Rest the door on a soft surface. - To replace the door, repeat the above steps in reverse order. Figure 26c 2 0 Figure 26d Figure 26a 0 Figure 26b 0 Figure 26 17