Avanti DG202BS Instruction Manual - Page 17
Removing The Oven Door, Type B, Type A, Care & Maintenance
View all Avanti DG202BS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
CARE & MAINTENANCE REMOVING THE OVEN DOOR Type A To facilitate oven cleaning, it is possible to remove the door. Please follow the instructions carefully: - Open the door completely. - Push down the lever "L" and, keeping it in this position, slowly close the door in order to block the hinge (fig. 23a). - Grip the door (as indicated in fig. 23b) and, while closing it, release the two hinges as shown in fig. 23c. - Rest the door on a soft surface. DOOR ASSEMBLY - Grip the door with your hands placed near the hinges and raise the levers "H" with your forefingers (fig. 23c) - Insert the hinges in their position until levers "H" are hooked. - Open the door completely to obtain the release of levers "L". Figure 23b REMOVING THE OVEN DOOR Type B The oven door can easily be removed as follows: - Open the door to the full extent (fig. 24a). - Attach the retaining rings to the hooks on the left and right hinges (fig. 24b). - Hold the door as shown in fig. 24. - Gently close the door and withdraw the lower hinge pins from their location (fig. 24c). - Withdraw the upper hinge pins from their location (fig. 24d). - Rest the door on a soft surface. - To replace the door, repeat the above steps in reverse order. Figure 23a L Figure 23c H Figure 24a Figure 24b Figure 24c Figure 24d Figure 24 17