Avanti DWF24V0W Install Manual - Page 4

and kept out of the reach of children. Danger of suffocation

Page 4 highlights

The dishwasher should be installed by an insured licensed plumber, contractor or trained installer. Installation performed by persons other than this could result in improper installation and property damage. •Do not operate the appliance if damaged, malfunctioning, partially disassembled or if it has missing or broken parts. •Also follow the safety instructions of the user manual. •To reduce the risk of electric shock, fire, or injury to persons, the installer must ensure that the dishwasher is completely enclosed at the time of installation. •Only connect the dishwasher to the power supply when all installation and plumbing work is complete •If the dishwasher is installed in a location that experiences freezing temperatures (e.g. in a vacation home, cabin, etc.), you must drain all the water from the dishwasher's interior. Water system ruptures that occur as a result of freezing are not covered by warranty •Dishwasher must be secured to adjacent cabinetry using the brackets provided. Failure to do this may cause damage to property or bodily injury Connect to a properly rated, protected and sized power supply circuit to avoid electrical overload. The dishwasher is designed for an electrical supply of 120 V (volts), 60 Hz (hertz), AC, connected to a dishwasher dedicated, properly grounded electrical circuit with a fuse or breakers rated for 15 amperes. Electrical supply conductors shall be a minimum of # 16 AWG copper wire rated at 75 °C (167 °F) or higher. These requirements must be met to prevent injury and machine damage. Consult a qualified electrician if in doubt. •Do not use any extension cord or portable outlet device to connect the dishwasher to a power supply. •Ensure that any plastic wrappings, bags, small pieces etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! •Remove the door to the washing compartment when removing an old dishwasher from service or discarding it. Ensure that the appliance presents no danger to children while being stored for disposal. •Old appliances may contain materials that can be recycled. Please contact your local recycling authority about the possibility of recycling these materials. •The dishwasher drain hose must be installed with a drain loop at least 28" (710mm) off the cabinet floor; otherwise the dishwasher may not drain properly. •This dishwasher is intended for residential use only, and should not be used in commercial establishments. •New installation - If the dishwasher is a new installation, most of the work must be done before the dishwasher is moved into place. •Replacement - If the dishwasher is replacing another dishwasher, check the existing dishwasher connections for compatibility with the new dishwasher, and replace parts as necessary. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

4
The dishwasher should be installed by an insured licensed plumber, contractor or
trained installer. Installation performed by persons other than this could result in
improper installation and property damage.
•Do not operate the appliance if damaged, malfunctioning, partially dis-
assembled or if it has missing or broken parts.
•Also follow the safety instructions of the user manual.
•To reduce the risk of electric shock, fire, or injury to persons, the installer must
ensure that the dishwasher is completely enclosed at the time of installation.
•Only connect the dishwasher to the power supply when all installation and
plumbing work is complete
•If the dishwasher is installed in a location that experiences freezing temperatures
(e.g. in a vacation home, cabin, etc.), you must drain all the water from the
dishwasher’s interior. Water system ruptures that occur as a result of freezing are
not covered by warranty
•Dishwasher must be secured to adjacent cabinetry using the brackets provided.
Failure to do this may cause damage to property or bodily injury
Connect to a properly rated, protected and sized power supply circuit to avoid
electrical overload. The dishwasher is designed for an electrical supply of 120 V
(volts), 60 Hz (hertz), AC, connected to a dishwasher dedicated, properly grounded
electrical circuit with a fuse or breakers rated for 15 amperes. Electrical supply
conductors shall be a minimum of # 16 AWG copper wire rated at 75 °C (167 °F) or
higher. These requirements must be met to prevent injury and machine damage.
Consult a qualified electrician if in doubt.
•Do not use any extension cord or portable outlet device to connect the
dishwasher to a power supply.
•Ensure that any plastic wrappings, bags, small pieces etc. are disposed of safely
and kept out of the reach of children. Danger of suffocation!
•Remove the door to the washing compartment when removing an old
dishwasher from service or discarding it. Ensure that the appliance presents no
danger to children while being stored for disposal.
•Old appliances may contain materials that can be recycled. Please contact
your local recycling authority about the possibility of recycling these materials.
•The dishwasher drain hose must be installed with a drain loop at least 28” (710mm)
off the cabinet floor; otherwise the dishwasher may not drain properly.
•This dishwasher is intended for residential use only, and should not be used in
commercial establishments.
•New installation - If the dishwasher is a new installation, most of the work must be
done before the dishwasher is moved into place.
•Replacement - If the dishwasher is replacing another dishwasher, check the existing
dishwasher connections for compatibility with the new dishwasher, and replace parts
as necessary.