Avanti DWF24V0W Install Manual - Page 9

H= 35 7/8 - 37 3/4 910mm-960mm

Get Avanti DWF24V0W PDF manuals and user guides View all Avanti DWF24V0W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

ADJUSTING HEIGHT First Step: Before the dishwasher is placed in the cabinetry, the front feet are closed until the end and the dishwasher is placed in the cabinetry. Second Step: Adjust the forefoot level with a flat screwdriver to stabilize the dishwasher and raise it to the enclosure height. Third Step: Adjust the rear foot level by placing a Philips screwdriver into (c) point balance and raise the dishwasher to the enclosure height. - Make sure the dishwasher is plumb and notice dishwasher can be placed with a small clearance under the counter top. - For front feet; turning the feet in the direction of the black arrows with the flat screwdriver allows the dishwasher to move downwards. - For rear feet; Turning the Philips screwdriver in the direction of the black arrows will take the dishwasher feet down. (c):Rear foot level adjusting point If the height of the enclosure s 33 7/8 "to 35 7/8" (860mm-910mm) use short supports as shown in the figure. opt.(+50) H= 35 7/8" - 37 3/4" (910mm-960mm) If the height of the enclosure s above 35 7/8 "(910mm) use long supports as shown in the figure. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
9
ADJUSTING HEIGHT
First Step:
Before the dishwasher is placed in the cabinetry, the front feet are closed until the end
and the dishwasher is placed in the cabinetry.
Second Step:
Adjust the forefoot level with a flat screwdriver to stabilize the dishwasher and raise it to
the enclosure height.
Third Step:
Adjust the rear foot level
by placing
a Philips screwdriver
into (c) point
balance and raise the
dishwasher to the enclosure height.
- Make sure the dishwasher is plumb and notice dishwasher can be placed with a small clearance
under the counter top.
-
- For front feet; turning the feet in the direction of the black arrows with the flat screwdriver allows the
dishwasher to move downwards.
-
- For rear feet; Turning the Philips screwdriver in the direction of the black arrows will take the
dishwasher feet down.
If the he
i
ght of the enclosure s 33 7/8 "to 35 7/8" (860mm-910mm) use short supports as
shown in the figure.
If the he
i
ght of the enclosure s above 35 7/8 "(910mm) use long supports as shown in the figure.
op
t
.(+50) H= 35 7/8" - 37 3/4" (910mm-960mm)
(c):Rear foot level adjusting point