Axis Communications 214 PTZ 214 PTZ - Installation Guide - Page 8

Page 8 AXIS 214 Installation Guide The AXIS Internet Dynamic DNS Service The AXIS Internet Dynamic DNS Service is a free service provided by Axis. The service allows you to quickly and simply install your camera, which then receives a static name (DNS name) and a dynamic IP address. More information about the AXIS Internet Dynamic DNS Service is available at www.axiscam.net To perform this procedure, your network should have an Internet connection with no HTTP proxy, and IP addresses should preferably be assigned via DHCP. 1. Connect the AXIS 214 to your local network, using a standard network cable. 2. Connect power to the camera. 3. Wait 60 seconds and, using a suitably pointed object, push the reset button on the underside of the camera once. 4. Visit www.axiscam.net where you will be guided through the remainder of the installation. Please have the serial number of your product ready and follow the instructions on the screen. The serial number/MAC address (S/N) is located on the label on the underside of the AXIS 214. 5. Enter a password for the root user (administrator). 6. If required, accept the installation of AMC onto your workstation. SeeAXIS Media Control (AMC), on page 9 for more information. 7. The installation is now complete. Note: Please note that this procedure will send the IP address, firmware version, product type, serial number and HTTP port number of the PTZ network camera to the AXIS Internet Dynamic DNS Service. No personal information is transferred. To remove the DNS name and unregister from this service, open the Setup pages in the PTZ network camera, click System Options > Network > TCP/IP > Basic, click the Settings button for the AXIS Internet Dynamic DNS Service and finally, click the Remove button. Setting the Password 1. When accessing the AXIS 214 for the first time, the Configure Root Password dialog will be displayed on the screen. 2. Enter a password and then re-enter it, to confirm the spelling. Click OK.