Axis Communications 214 PTZ 214 PTZ - User's Manual - Page 33

Date & Time, Network - Basic TCP/IP Settings, Date & Time Format Used in Images

Get Axis Communications 214 PTZ PDF manuals and user guides View all Axis Communications 214 PTZ manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

AXIS 214 PTZ 33 Date & Time Current Server Time - displays the current date and time (24h clock). The time can be displayed in 12h clock format in the Overlay Images (see below). New Server Time - Select your time zone from the drop-down list. If you want the server clock to automatically adjust for daylight savings time, select Automatically adjust for daylight saving time changes. From the Time Mode section, select the preferred method to use for setting the time: • Synchronize with computer time - sets the time from the clock on your computer. • Synchronize with NTP Server - the camera will obtain the time from an NTP server every 60 minutes. The NTP server's IP address or host name must be specified in the TCP/IP Advanced Settings - see page 34. • Set manually - this option allows you to manually set the time and date. Note: When using a host name for the NTP server, a DNS server must be configured under TCP/IP settings. See Network > TCP/IP below. Date & Time Format Used in Images - specify the formats for the date and time (12h or 24h) displayed in the Live View video streams. Use the predefined formats or use your own custom date and time formats. See Advanced File Naming & Date/Time Formats in the help files for information on how to create your own file formats. Network - Basic TCP/IP Settings IP Address Configuration Your Axis network camera supports both IP version 4 and IP version 6. Both versions may be enabled simultaneously, and at least one version must always be enabled. When using IPv4, the IP address can be set automatically via DHCP, or a static IP address can be set manually. If IPv6 is enabled, your camera will receive an IP address according to the configuration in the network router. There are also options for setting up notification of changes in the IP address, and for using the AXIS Internet Dynamic DNS Service. For more information on setting the IP address, please see the online help. Notes: • To receive notification whenever the camera's IP address changes (via e.g. DHCP), configure the options for notification of IP address change. See Services below. • Alternatively, if your DHCP server can update a DNS server, you can access the AXIS 214 PTZ by host name which is always the same, regardless of the IP address. Services Enable ARP/Ping setting of IP address - The IP address can be set using the ARP/Ping method, which associates the unit's MAC address with an IP address. Check this box to enable the service. Leave disabled to prevent unintentional resetting of the IP address. Notes: • The ARP/Ping service is automatically disabled 2 minutes after the unit is started, or as soon as an IP address is set. • Pinging the unit will still be possible when this service is disabled. Options for notification of IP address change - Automatic IP address assignment via DHCP may lead to the situation where the IP address changes and you lose contact with the camera. To configure notification of changes in the IP address, click Settings... and enter the required information. AXIS Internet Dynamic DNS Service - If the AXIS 214 PTZ has been registered with the Axis Internet Dynamic DNS service and the IP address for the product changes, the service is updated to reflect the change. Check the box to enable/disable automatic updates.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
33
AXIS 214 PTZ
Date & Time
Current Server Time
- displays the current date and time (24h clock). The time can be displayed in 12h
clock format in the Overlay Images (see below).
New Server Time
- Select your time zone from the drop-down list. If you want the server clock to
automatically adjust for daylight savings time, select
Automatically adjust for daylight saving time
changes
.
From the
Time Mode
section, select the preferred method to use for setting the time:
•
Synchronize with computer time
- sets the time from the clock on your computer.
•
Synchronize with NTP Server
- the camera will obtain the time from an NTP server every 60
minutes. The
NTP server
's IP address or host name must be specified in the
TCP/IP Advanced
Settings
- see page 34.
•
Set manually
- this option allows you to manually set the time and date.
Note:
When using a host name for the NTP server, a DNS server must be configured under
TCP/IP
settings. See
Network > TCP/IP
below.
Date & Time Format Used in Images
- specify the formats for the date and time (12h or 24h) displayed in
the Live View video streams.
Use the predefined formats or use your own custom date and time formats. See
Advanced File Naming &
Date/Time Formats
in the help files
for information on how to create your own file formats.
Network - Basic TCP/IP Settings
IP Address Configuration
Your Axis network camera supports both IP version 4 and IP version 6. Both versions may be enabled
simultaneously, and at least one version must always be enabled.
When using IPv4, the IP address can be set automatically via DHCP, or a static IP address can be set
manually.
If IPv6 is enabled, your camera will receive an IP address according to the configuration in the network
router.
There are also options for setting up notification of changes in the IP address, and for using the AXIS
Internet Dynamic DNS Service. For more information on setting the IP address, please see the online help.
Notes:
• To receive notification whenever the camera’s IP address changes (via e.g. DHCP), configure the options for notification of IP
address change. See
Services
below.
•
Alternatively, if your DHCP server can update a DNS server, you can access the AXIS 214 PTZ by host name
which is always the same, regardless of the IP address.
Services
Enable ARP/Ping setting of IP address
- The IP address can be set using the ARP/Ping method, which
associates the unit's MAC address with an IP address. Check this box to enable the service. Leave disabled to
prevent unintentional resetting of the IP address.
Notes:
• The ARP/Ping service is automatically disabled 2 minutes after the unit is started, or as soon as an IP address is set.
•
Pinging the unit will still be possible when this service is disabled.
Options for notification of IP address change - Automatic IP address assignment via DHCP may lead to the
situation where the IP address changes and you lose contact with the camera. To configure notification of
changes in the IP address, click Settings... and enter the required information.
AXIS Internet Dynamic DNS Service - If the AXIS 214 PTZ has been registered with the Axis Internet
Dynamic DNS service and the IP address for the product changes, the service is updated to reflect the
change. Check the box to enable/disable automatic updates.