Axis Communications 214 PTZ 214 PTZ - User's Manual - Page 6

AXIS 214 PTZ 6 Rear panel The rear panel provides access to all of the available connections on the AXIS 214 PTZ. The view shown here is from a ceiling mounted camera. Control button Power indicator Network indicator Status indicator LINE OUT I/O terminal connector Power connector LINE/MIC IN Network connector Control button - This is used to restore the factory default settings, described in Resetting to the factory default settings, on page 38. Indicators - After completion of the startup and self-test routines, the multi-colored Network, Status and Power indicators flash as follows: Network Status Power Amber Green None Green Amber Green Amber Flashes for activity on a 10 Mbit/s network Flashes for activity on a 100 Mbit/s network No connection Normal operation Flashes during startup, reset to factory default and firmware upgrade Normal operation Flashes green/amber during upgrade I/O terminal connector - The I/O terminal connector provides the physical interface to one transistor output, one digital input and an auxiliary connection point for DC power. For more information, see I/O inputs and outputs, on page 39. Network connector - The AXIS 214 PTZ connects to the network via a standard network cable. The speed of the local network segment (10BaseT/100BaseTX Ethernet) is automatically detected. LINE OUT - For connecting a public address (PA) system or an active speaker with a built-in amplifier. A stereo connector must be used for the audio out. LINE/MIC IN - Input for a mono microphone, or for a line-in mono signal (only the left channel is used from a stereo signal) Power connector - For connection of the power adapter (included).