Axis Communications 214 PTZ 214 PTZ - User's Manual - Page 48

GIF Graphics Interchange Format, GOV Group Of VOPs

Page 48 highlights

settings, this will, for many devices, completely reset any settings that were changed by the user. Firewall - A firewall works as a barrier between networks, e.g. between a Local Area Network and the Internet. The firewall ensures that only authorized users are allowed to access the one network from the other. A firewall can be software running on a computer, or it can be a standalone hardware device. Focal length - Measured in millimeters, the focal length of a camera lens determines the width of the horizontal field of view, which in turn is measured in degrees. FTP (File Transfer Protocol) - An application protocol that uses the TCP/IP protocols. It is used to exchange files between computers/devices on networks. Frame - A frame is a complete video image. In the 2:1 interlaced scanning format of the RS-170 and CCIR formats, a frame is made up of two separate fields of 262.5 or 312.5 lines interlaced at 60 or 50 Hz to form a complete frame, which appears at 30 or 25 Hz. In video cameras with a progressive scan, each frame is scanned line-by-line and not interlaced; most are also displayed at 30 and 25 Hz. Frame rate - The frame rate used to describe the frequency at which a video stream is updated is measured in frames per second (fps). A higher frame rate is advantageous when there is movement in the video stream, as it maintains image quality throughout. Full-duplex - Transmission of data in two directions simultaneously. In an audio system this would describe e.g. a telephone systems. Half-duplex also provides bi-directional communication, but only in one direction at a time, as in a walkie-talkie system. See also Simplex. Gain - The amplification factor and the extent to which an analog amplifier boosts the strength of a signal. Amplification factors are usually expressed in terms of power. Decibel (dB) is the most common way of quantifying the gain of an amplifier. Gateway - A gateway is a point in a network that acts as an entry point to another network. In a corporate network for example, a computer server acting as a gateway often also acts as a proxy server and a firewall server. A gateway is often associated with both a router, which knows where to direct a given packet of data that arrives at the gateway, and a switch, which furnishes the actual path in and out of the gateway for a given packet. GIF (Graphics Interchange Format) - GIF is one of the most common file formats used for images in web pages. There are two versions of the format, 87a and 89a. Version 89a supports animations, i.e. a short sequence of images within a single GIF file. GIF89a can also be specified for interlaced presentation. GOV (Group Of VOPs) - A group of VOPs is the basic unit of an MPEG-4 video stream. The GOV contains different types and numbers of VOPs (I-VOPs, P-VOPs) as determined by the GOV length and GOV structure. See also VOP. GOV length - The GOV length determines the number of images (VOPs) in the GOV structure. See also GOV and VOP. GOV structure - The GOV structure describes the composition of an MPEG-4 video stream, as regards the type of images (I-VOPs or P-VOPs) included in the stream, and their internal order. See also GOV and VOP. Half-duplex - See Full-duplex. HTML (Hypertext Markup Language) - HTML is the set of "markup" symbols or codes inserted in a file intended for display in web browser. The markup tells the browser how to display the page's words and images for the user. HTTP (Hypertext Transfer Protocol) - HTTP is the set of rules for exchanging files (text, graphic images, sound, video, and other multimedia files) on the web. The HTTP protocol runs on top of the TCP/IP suite of protocols. Hub - A (network) hub is used to connect multiple devices to the network. The hub transmits all data to all devices connected to it, whereas a switch will only transmit the data to the device it is specifically intended for. IEEE 802.11 - A family of standards for wireless LANs. The 802.11 AXIS 214 PTZ 48 standard supports 1 or 2 Mbit/s transmission on the 2.4 GHz band. IEEE 802.11b specifies an 11 Mbit/s data rate on the 2.4 GHz band, while 802.11a allows up to 54 Mbit/s on the 5 GHz band. Image compression - Image compression minimizes the file size (in bytes) of an image. Two of the most common compressed image formats are JPEG and GIF. Interlacing - Interlaced video is video captured at 50 pictures (known as fields) per second, of which every 2 consecutive fields (at half height) are then combined into 1 frame. Interlacing was developed many years ago for the analog TV world and is still used widely today. It provides good results when viewing motion in standard TV pictures, although there is always some degree of distortion in the image. To view interlaced video on e.g. a computer monitor, the video must first be de-interlaced, to produce progressive video, which consists of complete images, one after the other, at 25 frames per second. See also Progressive scan. IP (Internet Protocol) - The Internet Protocol is a method transmitting data over a network. Data to be sent is divided into individual and completely independent "packets." Each computer (or host) on the Internet has at least one address that uniquely identifies it from all others, and each data packet contains both the sender's address and the receiver's address. The Internet Protocol ensures that the data packets all arrive at the intended address. As IP is a connectionless protocol, which means that there is no established connection between the communication end-points, packets can be sent via different routes and do not need to arrive at the destination in the correct order. Once the data packets have arrived at the correct destination, another protocol - Transmission Control Protocol (TCP) - puts them in the right order. See also TCP. IP Address - An IP address is simply an address on an IP network used by a computer/device connected to that network. IP addresses allow all the connected computers/devices to find each other and to pass data back and forth. To avoid conflicts, each IP address on any given network must be unique. An IP address can be assigned as fixed, so that it does not change, or it can be assigned dynamically (and automatically) by DHCP. An IP address consists of four groups (or quads) of decimal digits separated by periods, e.g. 130.5.5.25. Different parts of the address represent different things. Some part will represent the network number or address, and some other part will represent the local machine address. See also IP (Internet Protocol). Infrared (IR) - Infrared radiation is radiation at a longer wavelength than visible light, which means it cannot be seen by the naked human eye. As infrared radiation can be detected as heat, this can be shown on a screen or captured by a digital camera, with hotter objects showing up brighter against colder surroundings (e.g. a human body against a colder background). As color cameras can "see" infrared radiation as well as visible light, these cameras are equipped with an IR-cut filter, to prevent distortion of the colors the human eye can see. To use the camera in very dark locations or at night, this filter can be removed, to allow infrared radiation to hit the image sensor and thus produce images. An infrared lamp can be used for improved illumination for night surveillance, whilst not producing any extra visible light. Inputs/Outputs (I/O's) - The digital I/Os on, for example, a network camera can be used to connect any device that can toggle between an open and a closed circuit. If, for example, a door switch is used as an input device, opening the door could trigger the upload of video images and the sending of notification messages. An output might, for example, be used to automatically start a siren when there is a motion detection trigger. I-VOP - See VOP.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53

48
AXIS 214 PTZ
settings, this will, for many devices, completely reset any settings that
were changed by the user.
Firewall -
A firewall works as a barrier between networks, e.g.
between a Local Area Network and the Internet. The firewall ensures
that only authorized users are allowed to access the one network from
the other. A firewall can be software running on a computer, or it can
be a standalone hardware device.
Focal length
-
Measured in millimeters, the focal length of a camera
lens determines the width of the horizontal field of view, which in
turn is measured in degrees.
FTP (File Transfer Protocol) -
An application protocol that uses the
TCP/IP protocols. It is used to exchange files between
computers/devices on networks.
Frame -
A frame is a complete video image. In the 2:1 interlaced
scanning format of the RS-170 and CCIR formats, a frame is made up
of two separate fields of 262.5 or 312.5 lines interlaced at 60 or 50 Hz
to form a complete frame, which appears at 30 or 25 Hz. In video
cameras with a progressive scan, each frame is scanned line-by-line
and not interlaced; most are also displayed at 30 and 25 Hz.
Frame rate -
The frame rate used to describe the frequency at which
a video stream is updated is measured in frames per second (fps). A
higher frame rate is advantageous when there is movement in the
video stream, as it maintains image quality throughout.
Full-duplex -
Transmission of data in two directions simultaneously.
In an audio system this would describe e.g. a telephone systems.
Half-duplex also provides bi-directional communication, but only in
one direction at a time, as in a walkie-talkie system. See also
Simplex
.
Gain -
The amplification factor and the extent to which an analog
amplifier boosts the strength of a signal. Amplification factors are
usually expressed in terms of power. Decibel (dB) is the most common
way of quantifying the gain of an amplifier.
Gateway -
A gateway is a point in a network that acts as an entry
point to another network. In a corporate network for example, a
computer server acting as a gateway often also acts as a proxy server
and a firewall server. A gateway is often associated with both a
router, which knows where to direct a given packet of data that
arrives at the gateway, and a switch, which furnishes the actual path
in and out of the gateway for a given packet.
GIF (Graphics Interchange Format) -
GIF is one of the most common
file formats used for images in web pages. There are two versions of
the format, 87a and 89a. Version 89a supports animations, i.e. a short
sequence of images within a single GIF file. GIF89a can also be
specified for interlaced presentation.
GOV (Group Of VOPs) -
A group of VOPs is the basic unit of an
MPEG-4 video stream. The GOV contains different types and numbers
of VOPs (I-VOPs, P-VOPs) as determined by the GOV length and GOV
structure. See also
VOP
.
GOV length -
The GOV length determines the number of images
(VOPs) in the GOV structure. See also
GOV
and
VOP
.
GOV structure -
The GOV structure describes the composition of an
MPEG-4 video stream, as regards the type of images (I-VOPs or
P-VOPs) included in the stream, and their internal order. See also
GOV
and
VOP
.
Half-duplex -
See
Full-duplex
.
HTML (Hypertext Markup Language) -
HTML is the set of "markup"
symbols or codes inserted in a file intended for display in web
browser. The markup tells the browser how to display the page's
words and images for the user.
HTTP (Hypertext Transfer Protocol) -
HTTP is the set of rules for
exchanging files (text, graphic images, sound, video, and other
multimedia files) on the web. The HTTP protocol runs on top of the
TCP/IP suite of protocols.
Hub -
A (network) hub is used to connect multiple devices to the
network. The hub transmits all data to all devices connected to it,
whereas a switch will only transmit the data to the device it is
specifically intended for.
IEEE 802.11 -
A family of standards for wireless LANs. The 802.11
standard supports 1 or 2 Mbit/s transmission on the 2.4 GHz band.
IEEE 802.11b specifies an 11 Mbit/s data rate on the 2.4 GHz band,
while 802.11a allows up to 54 Mbit/s on the 5 GHz band.
Image compression -
Image compression minimizes the file size (in
bytes) of an image. Two of the most common compressed image
formats are JPEG and GIF.
Interlacing -
Interlaced video is video captured at 50 pictures (known
as fields) per second, of which every 2 consecutive fields (at half
height) are then combined into 1 frame. Interlacing was developed
many years ago for the analog TV world and is still used widely
today. It provides good results when viewing motion in standard TV
pictures, although there is always some degree of distortion in the
image.
To view interlaced video on e.g. a computer monitor, the video must
first be de-interlaced, to produce progressive video, which consists of
complete images, one after the other, at 25 frames per second. See
also
Progressive scan
.
IP (Internet Protocol) -
The Internet Protocol is a method
transmitting data over a network. Data to be sent is divided into
individual and completely independent "packets." Each computer (or
host) on the Internet has at least one address that uniquely identifies
it from all others, and each data packet contains both the sender's
address and the receiver's address.
The Internet Protocol ensures that the data packets all arrive at the
intended address. As IP is a connectionless protocol, which means
that there is no established connection between the communication
end-points, packets can be sent via different routes and do not need
to arrive at the destination in the correct order.
Once the data packets have arrived at the correct destination, another
protocol - Transmission Control Protocol (TCP) - puts them in the
right order. See also
TCP
.
IP Address -
An IP address is simply an address on an IP network
used by a computer/device connected to that network. IP addresses
allow all the connected computers/devices to find each other and to
pass data back and forth.
To avoid conflicts, each IP address on any given network must be
unique. An IP address can be assigned as fixed, so that it does not
change, or it can be assigned dynamically (and automatically) by
DHCP.
An IP address consists of four groups (or quads) of decimal digits
separated by periods, e.g. 130.5.5.25. Different parts of the address
represent different things. Some part will represent the network
number or address, and some other part will represent the local
machine address.
See also
IP (Internet Protocol).
Infrared (IR) -
Infrared radiation is radiation at a longer wavelength
than visible light, which means it cannot be seen by the naked human
eye. As infrared radiation can be detected as heat, this can be shown
on a screen or captured by a digital camera, with hotter objects
showing up brighter against colder surroundings (e.g. a human body
against a colder background).
As color cameras can "see" infrared radiation as well as visible light,
these cameras are equipped with an IR-cut filter, to prevent distortion
of the colors the human eye can see. To use the camera in very dark
locations or at night, this filter can be removed, to allow infrared
radiation to hit the image sensor and thus produce images.
An infrared lamp can be used for improved illumination for night
surveillance, whilst not producing any extra visible light.
Inputs/Outputs (I/O's) -
The digital I/Os on, for example, a network
camera can be used to connect any device that can toggle between an
open and a closed circuit.
If, for example, a door switch is used as an input device, opening the
door could trigger the upload of video images and the sending of
notification messages.
An output might, for example, be used to automatically start a siren
when there is a motion detection trigger.
I-VOP -
See
VOP
.