Axis Communications 214 PTZ 214 PTZ - User's Manual - Page 37

Network - UPnP™, Network - RTP / MPEG-4, Network - Bonjour, Ports & Devices - I/O Ports, Maintenance

Get Axis Communications 214 PTZ PDF manuals and user guides View all Axis Communications 214 PTZ manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

AXIS 214 PTZ 37 Network - UPnP™ The AXIS 214 PTZ includes support for UPnP™ in Windows Me and Windows XP. Enabled by default. Note: UPnP™ must be installed on your workstation. To do this, open the Control Panel from the Start Menu and select Add/Remove Programs. Select Add/Remove Windows Components and open the Networking Services section. Click Details and then select UPnP as the service to add. Network - RTP / MPEG-4 These settings are for the IP addresses, port numbers, and Time-To-Live values to use for media streams in the MPEG-4 format. Only certain IP addresses and port numbers should be used for these streams. For more information, please see the online help. Network - Bonjour Your Axis network camera includes support for Bonjour. When enabled, the camera is automatically detected by operating systems and clients that support this protocol. Ports & Devices - I/O Ports The pinout, interface support and the control and monitoring functions are described in the section Connections, on page 39. Maintenance • Restart - The unit is restarted without changing any of the settings. Use this method if the unit is not behaving as expected. • Restore - The unit is restarted and most current settings are reset to factory default values. The settings that will not be reset are as follows: • the boot protocol (DHCP or static) • the static IP address • the default router • the subnet mask • the system time. • Default - The Factory default button should be used with caution. Pressing this button will reset all of the AXIS 214 PTZ's settings to the factory default values (including the IP address). Upgrade Server - See Updating the Firmware, on page 40. Backup - click the Backup button to take a backup of all of the parameters, and any user-defined scripts. If necessary, it is then possible to return to the previous settings if the settings are changed and there is unexpected behavior. Note: The root password will also be reset to the password saved in the backup file. Restore - click the Browse button to locate the saved backup file (see above) and then click the Restore button. The settings will be restored to the previous configuration. Note: Backup and Restore can only be used on the same unit running the same firmware. This feature is not intended for multi-unit configuration or for firmware upgrades.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
37
AXIS 214 PTZ
Network - UPnP™
The AXIS 214 PTZ includes support for UPnP™ in Windows Me and Windows XP. Enabled by default.
Note:
UPnP™ must be installed on your workstation. To do this, open the Control Panel from the
Start Menu
and select
Add/Remove
Programs
. Select
Add/Remove Windows Components
and open the
Networking Services
section. Click
Details
and then select
UPnP
as the service to add.
Network - RTP / MPEG-4
These settings are for the IP addresses, port numbers, and Time-To-Live values to use for media streams in
the MPEG-4 format. Only certain IP addresses and port numbers should be used for these streams. For more
information, please see the online help.
Network - Bonjour
Your Axis network camera includes support for Bonjour. When enabled, the camera is automatically
detected by operating systems and clients that support this protocol.
Ports & Devices - I/O Ports
The pinout, interface support and the control and monitoring functions are described in the section
Connections
, on page 39.
Maintenance
•
Restart
- The unit is restarted without changing any of the settings. Use this method if the unit is not
behaving as expected.
•
Restore
- The unit is restarted and most current settings are reset to factory default values. The settings
that will not be reset are as follows:
•
the boot protocol (DHCP or static)
•
the static IP address
•
the default router
•
the subnet mask
•
the system time.
•
Default
- The Factory default button should be used with caution. Pressing this button will reset all
of
the AXIS 214 PTZ's settings to the factory default values (including the IP address).
Upgrade Server
- See
Updating the Firmware
, on page 40.
Backup
- click the
Backup
button to take a backup of all of the parameters, and any user-defined scripts. If
necessary, it is then possible to return to the previous settings if the settings are changed and there is
unexpected behavior.
Note:
The root password will also be reset to the password saved in the backup file.
Restore
- click the
Browse
button to locate the saved backup file (see above) and then click the
Restore
button. The settings will be restored to the previous configuration.
Note:
Backup
and
Restore
can only be used on the same unit running the same firmware. This feature is not intended for multi-unit
configuration or for firmware upgrades.