Axis Communications 240Q 240Q Blade - Installation Guide - Page 3

AXIS 240Q Blade - Rack Solution Installation Guide 3 The Axis Video Server Rack will fit up to 12 rack mounted Axis Video Servers (Blade Servers). This installation guide describes the hardware installation of the Axis Rack Mounted Video Server Solution. To set the IP address and install the video server on your network, please see the AXIS 240Q Installation Guide. For all other aspects of using the product, please see the User's Manual. Hardware Inventory Please contact your dealer if anything is missing or damaged. Qty Item 1 Video server 2 Connector 1 Warranty Document 1 Installation Guide 1 CD 1 This Document Title/Variants AXIS 240Q Blade Video Server 14-pin terminal connector block AXIS 240Q Installation Guide Documentation and software AXIS 240Q Blade - Rack Solution Installation Guide AXIS 240Q Blade Description Read the following information to familiarize yourself with the AXIS 240Q Blade video server, making particular note of where the connectors and indicators are located: Control Button See the AXIS 240Q User's Manual for information on using the control button. AXIS 240Q Blade Control button Indicators Network Amber Green Red Status None Green Amber Red Power Green Amber Flashes for activity on a 10 Mbit/s network Flashes for activity on a 100 Mbit/s network Flashes rapid red for hardware error, together with the Status indicator No connection Normal operation Flashes during reset to factory default or at firmware upgrade Flashes rapid red for a hardware error, together with the Network indicator Normal operation Flashes green/amber during upgrade Serial number P/N: XXXX-YYY-ZZ S/N: 00408C1A2B3C Top and bottom screws are used to secure the blade server in the rack