Beko DIN14C10 User Manual - Page 27
Clean²ng the ²mpellers, Lower ²mpeller, Clean²ng the hose f²lter
View all Beko DIN14C10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Maintenance and cleaning 4. Clean all three filters under tap water by means of a brush. 5. Replace the metal/plastic filter. 6. Place the coarse filter into the microfilter. Make sure that it is properly seated. Turn the coarse filter clockwise until a "click" sound is heard. C Do not use the dishwasher without filter. Cleaning the impellers Clean the impellers at least once a week in order for the machine operates efficiently. Lower impeller Check if the holes on the lower impeller (1) are clogged. If they are clogged, remove and clean the impeller. Pull the lower impeller up to remove it (A, B). C Incorrect placement of the filters will reduce washing efficiency. Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose. Check the filter and the hose regularly and clean them if necessary. 1. Turn off the tap and remove the hose. 2. After taking out the filter, clean it under running tap water. 3. Place the cleaned filter back to its seat in the hose. 4. Install the hose to tap. 1 A B (depends on model) C Dishwasher / User's Manual 27/35 EN