Beko DSFN6839 User Manual - Page 13

To Adjust the Water Hardness; 1. Press and hold the Programme Selection Key when the machine is off and press On/Off button simultaneously to turn on your machine. Release the Programme Selection Key when the water hardness level stored on your machine is displayed in "r....." format. 2. Start / Stop icon will start flashing as soon as the water hardness level stored on your machine is displayed in "r....." format. 3. Select the water hardness level suitable to your machine from the Water Hardness Level Adjustment Table by pressing the Delayed Start Key. 4. Press «Start/Pause/Cancel» key once to store the level you have selected. 5. Start / Stop icon will light continuously when the new water hardness level is stored. 6. Press the On/Off button to turn off your machine. Water Hardness Level Adjustment Table ��� ��� If the hardness level of the water that you use is above 80 °dF (French standard for water hardness) or if you are using well water, then it is recommended to use filter and water purification devices. If the hardness level of the water that you use is below 8°dF (French standard for water hardness), there is no need to use salt in your dishwasher. If the water hardness adjustment is set to level 1, the "No salt warning indicator" will illuminate continuously although it is not necessary to use salt. If you use salt under this condition, salt will not be consumed and the lamp will not illuminate. 12 GB