Beko DSFN6839 User Manual - Page 27

"ON", then the rinse aid indicator will come on when the rinse aid level in your machine becomes low while the machine is in use. If you switch off the machine with "On/Off" button when the status is "OFF", then the rinse aid indicator will never come on. Starting Your Machine • Plug the mains plug into the wall socket. • Open the tap. • Open the door. • Place the dishes. • Check if the upper and lower impellers rotate freely. • Put sufficient amount of detergent in the detergent dispenser and close its lid. • Press On/Off button. • Check if the salt and rinse aid warning indicators light and add salt and/or rinse aid if needed. • Determine your washing programme with the aid of the Programme Data and Table of Average Consumption Values. • You can select the determined washing programme by pressing programme selection button. • You can see the programme time in the Remaining Time Indicator. • If necessary, you can change your washing programme as you prefer by means of the Add Function Buttons. • Start the programme by pressing the Start / Pause / Cancel button. / Cancel button if you have to open the door. Then, open the door of your machine. There may be a rush of vapor when you open the door of your machine; be careful. Close the door and press Start/Pause/Cancel button again. Programme will resume running. • End of Programme indicator will light up. • Turn off your machine by pressing On / Off button. • Close the tap. • Unplug the mains plug from the wall socket. • Leave your dishes in the machine for about 15 minutes after they are washed in order to have them cooled down. Your dishes will dry in a shorter time if you leave the door of your machine ajar during this period. This will increase the drying effectiveness of your machine. WARNING: Pay attention not to open the door of the machine when it is running. Stop the machine by pressing Start / Pause 26 GB