Beko DSFN6839 User Manual - Page 31

8 Before calling service / Trouble shooting Before calling service check the following & Trouble shooting guide supplied on the following page. � � TROUBLE SHOOTING GUIDE SYMPTOMS POSSIBLE CAUSES SOLUTIONS Insufficient amount of detergent Increase the amount of detergent, especially when washing full loads, or in hard water. Hard water. Increase water softener dosage. Use additional detergent, increase rinse agent dosage. Spray arms need cleaning Check the nozzle holes in the spray arms. They may be blocked with a soil particle. Check and clean them periodically. Spotting / filming / poor cleaning results Improper loading. Follow instructions for use for proper loading procedures. Place dishes so water spray reaches all soiled surfaces. Do not overcrowd the baskets since this will block the water spray. Insufficient water fill. Check mains water pressure Filter system needs cleaning. Remove any accumulated or deposited foods. Check and clean them periodically. Oversudsing - Prewashing with Rinse items thoroughly before putting them in the a liquid dishwashing detergent. dishwasher to remove dishwashing detergent. Water not reaching surfaces, dishwasher overcrowded. Small particles (food or Insufficient water fill. detergent) left on items Powder detergent stored too long or under adverse conditions. Check to be sure water action is not blocked by dishes. Check filter system for accumulated or deposited food or detergent. Load dishwasher correctly. Keep filter system clean. Check mains water pressure Use powder detergent within one to two months after purchase. Open one box at a time. Always close pouring spout after each use. Store in a cool, dry place. Rinse aid supply depleted. Add rinse aid to the dispenser. 30 GB