Beko HBG60 User Manual - Page 12

3 Operating your appliance Key E = The Timer times the functions on activation for 15 minutes, after which they are switched off. The Timer is deactivated by re-pressing Key E. When the Timer is activated the decimal point must flash on the display. The Timer cannot be activated if the intensive speed is functioning. The "clean air" function is activated by pressing key E for 2 seconds when the appliance is switched off. This switches the motor on for 10 minutes every hour at the first speed. During functioning a rotary movement of the peripheral segments must be visualised on the display. When this time has passed the motor switches off and the fixed letter "C" must be visualised on the display until the motor re-starts after 50 minutes for another 10 minutes and so on. Press any key apart from the light keys to return to normal functioning. Press key E to deactivate the function. Mechanical controls (Fig.12): the symbols are as follows: A = LIGHT / ON-OFF key B = OFF /FIRST SPEED key C = SECOND SPEED key D = THIRD SPEED key If the hood is shut off at first, second or third speed, when it is turned back on, it will start at the same speed it was in when switched off. THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR EVENTUAL DAMAGES CAUSED BY BREACHING THE ABOVE WARNINGS. Active carbon/grease filter saturation: •• When display item C flashes, at a speed where it alternates with the letter F (e.g. 1 and F), the grease filters must be washed. •• When display item C flashes, at a speed where it alternates with the letter A (e.g. 1 and A), the active carbon filters must be replaced or washed depending on the type of filter. After the clean filter has been positioned correctly, the electronic memory must be reset by pressing button A for approximately 5 seconds, until the indication F or A shown on the display C stops flashing. 12 / 13 EN Cooker Hood / User Manual