Beko HBG60 User Manual - Page 6

1 Important instructions for safety and environment General Carefully read the following important information regarding installation safety and maintenance. Keep this information booklet accessible future reference. The appliance has been designed for use in the ducting version (air exhaust to the outside - Fig.1B), filtering version (air circulation on the inside - Fig.1A) or with external motor (Fig.1C). Safety precaution •• Take care when the cooker hood is operating simultaneously with an open fireplace or burner that depend on the air in the environment and are supplied by other than electrical energy, as the cooker hood removes the air from the environment which a burner or fireplace need for combustion. The negative pressure in the environment must not exceed 4Pa (4x10-5 bar). Provide adequate ventilation in the environment for a safe operation of the cooker hood. Follow the local laws applicable for external air evacuation. Before connecting the model to the supply network: •• Check the data plate (positioned inside the appliance) to ensure that the voltage and power correspond to the network and the socket is suitable. If in doubt ask a qualified electrician. •• If the power supply cable is damaged, it must be replaced with another cable or a special assembly, which may be obtained direct from the manufacturer or from the Technical Assistance Centre. •• This device must be connected to the mains supply through either a plug fused at 3A or hardwired to a single phase spur protected by 3A fuse. A In certain circumstances electrical appliances may be a danger hazard. •• Do not check the status of the filters while the cooker hood is operating. •• Do not touch bulbs or adjacent areas, during or straight after prolonged use of the lighting installation. •• Flambè cooking is prohibited underneath the cooker hood. 6 / 13 EN Cooker Hood / User Manual