Beko HIC64402T User Manual - Page 10

location Assembly of the Built-in Hob This built-in hob is intended to be fitted into a hollow in a worktop. Fitting may only be performed by a trained professional. An electrical professional must connect the appliance to the mains supply. An all-pole separator with a contact opening of at least 3 mm must be built into the house installation (screw-retaining devices, earthed conductor switch, main switch). The distance from one high side wall to the side hollow corner must amount to at least 50 mm. If a stove is to be fitted underneath the hob, it must be ventilated. 5.0 cm (rqn) 5 cm (min) 49 cm * 56 cm for 60 cm Hobs 75 cm for 80 cm Hobs In addition, you can install your hob according to the illustrated figure by means of assembly clamp. Use of assembly clamp may change according to your model. 5 cm (min 9