Beko HIC64402T User Manual - Page 17

Cancel Timers : Firstly you have to select the timer by toggling the "0" key until it is displayed. The value can be canceled then in 2 different ways: • decrement by touching the "Ne" until "00" appears on the timer display. • touch the "n" and "v" key El simultaneously for half second until "00" is shown in Timer display. When the time has run out, the buzzer will sound. You have to touch any key on touch control panel to stop the buzzer sound. Display remaining value of hotplate timer 3 (indicator led flashing) in Timer Display (Indicators leds are on indicate running timers for hotplate 1 and 4, actually not displayed in timer display) Warming plate function (if available) Warming Plate functionality for a warming zone offers an means an additional heat level between 0 and 1 keeping the food warm. You can activate Warming Plate functionality by "0" touching the "0" key . Then LED will "0" flash. Touch again to deactivate warming zone. Operating time limitations The hob control has a limitation of the operating time. If one or more hotplates are inadvertently not switched off , hotplate will be automatically deactivated after a certain amount of time. (see table-1 below) The limit of the operating time depends of the selected heat setting. If a timer was associated with the hotplate than a "00" will be displayed on the timer display for 10 seconds.( after 10 seconds residual heat indicator will light). Afterwards the timer display switches off. After an automatic switch off of the hotplate, as described above, the hotplate is re-operable again and the maximum operating time for this heat setting is applied. Heat setting OFF- Time ON- Time Operating time period in s period in s limitation in h 0 0 0 0 U 45,9 1,1 6 1 45,6 1,4 6 2 43,6 3,4 6 3 41,3 5,7 5 4 38,4 8,6 5 5 35,9 11,1 4 6 33,1 13,9 1,5 7 26,2 20,8 1,5 8 19,2 27,8 1,5 9 0 47,0 1,5 Table -1: Heat setting parameters, Cycle Time 47,0 s 16 Heat boost duration in s 60 180 288 390 510 150 210 270 -