Beko HIC64402T User Manual - Page 16

Egg timer: The egg timer is independent of any hotplate. So it doesn't matter whether a hotplate is selected or not. 1. Start to activation of egg timer by touching "0" key. The timer display will indicate "00" and a dot in the right bottom side Eq Pi . The egg timer is active now. 2. Then set the desired time value by touching "n" and "s/" keys. 3. After setting the, time the timer starts to countdown. When the time has run out, the buzzer will sound. You have to touch any key on touch control panel to stop the buzzer sound. Hotplate timer : Hotplate timers can be set only for activated hotplate. 1. Firstly turn on the hob and activate desired hotplate. (hotplate level must be set to 1-9 before) 2. Start to activation of hotplate timer by touching "0" key same as with egg timer. The timer display will indicate "00" and a dot in the right bottom side °Alo . The egg timer is active now. 3. You have to touch "0" key second time to activate the hotplate timer. Now the timer can be assigned. 4. Set the desired time value with "n" and "v" keys. To set additional hotplate timers : 1. Touch "0" key again after activating the first hotplate timer. The control rotates clockwise to the next active hotplate assigned to a timer. The assignment recommendation is indicated by the flashing "LO" led. 2. Set the desired time value with "n" and "v" keys. 3. The running timer of the first set hotplate timer is indicated by the statically lighting "ioi" LED. • Touching the "0" key once again further timers can be assigned to other activated hotplates. • The timer display will change to time that will end first after 10 sec. 111 • The statically on LEDs °P, PI° on timer display identify us the running timers. • By toggling the "0" key you can display the timer values for the hotplate timers and the egg timer. The assignment is always indicated by the flashing Front left led "I!". If no led flashes, the Egg timer value is shown in the timer display. 15