Beko HII64500FHT User Manual - Page 19

» To change the temperature value at a later stage, touch the wide surface cooking zone selection key and activate the cooking zone. Adjust the desired temperature value in the adjustment area. Turning off the wide surface cooking zone Wide surface cooking zone can be turned off in 4 different ways: 1. By dropping the temperature level to "0" You can turn the wide surface cooking zone off by dropping the temperature level to "0". 2. By using the turn-off with the timer option for the wide surface cooking zone When the time is over, the timer will turn off the wide surface cooking zone. 0 will appear on the left cooking zone display and 00 will appear on the timer display. The "0" symbol on the rear left cooking zone display will disappear. 3. By touching the symbol of any of the left cooking zones If you touch the symbol of any of the left cooking zones while the wide surface cooking zone is active, cooking zones are separated and turned off. 4. By touching the wide surface cooking zone symbol for 3 seconds. If you touch the wide surface cooking zone symbol for 3 seconds, the cooking zone is turned off High Power (Booster) Function For rapid heating, you can use booster function. However, this function is not recommended for cooking a long time. Booster function may not be available in all cooking zones. Selecting Booster directly: 1. Touch "0" key to turn on the hob. 2. Select the desired cooking zone by touching the Cooking Zone Selection keys. "tEfJrJ" 3. Touch the key. Selected cooking zone will operate at the maximum power and 3 lights will flash on the cooking zone display respectively. When booster time ends, cooking zone turns off. Selecting Booster when cooking zone is active: 1. Touch "tb" after cooking zone has operated at least 20 seconds on a certain level. ooking zone should complete operating or at least 20 seconds on the selected evel. 2. Selected cooking zone will operate at the maximum power and 3 lights will flash on the cooking zone display respectively. Once the Booster period is over, the cooking zone switches to the set temperature level and only the selected temperature value is displayed. Turning JoSSff Booster function prematurely: Touch "tb" to turn off booster any time you want. Quick heating Qucik heating is a function which facilitates cooking. It can be used for rapid heating for short time period. All cooking zones are equipped with Quick heating function. This function can be operated by setting temperature level beforehand. Quick heating function can be set within 20 seconds after cooking zone is switched on and emperature level is adjusted. Selecting Quick heating function: * 1. Touch "U" key to turn on the hob. 2. Select the desired cooking zone by touching the Cooking Zone Selection keys. 3. Adjust the desired temperature level by touching the adjustment area or by sliding your finger across the area. 4. Touch the "6" key. The cooking zone you have selected will operate at high power for a certain period of time (see following table). 3 lights and the set temperature value will appear on the cooking zone display respectively. 5. Once the Quick heating period is over, the cooking zone switches to the set temperature level and only the selected temperature value is displayed. Table: Quick Heating Operation Times Temperature level 0 1 2 3 4 5 6 7 8 9 10 Operation time limit second 0 10 10 20 30 40 47 56 65 75 85 19/EN