Beko HII64500FHT User Manual - Page 21
Beko HII64500FHT Manual
View all Beko HII64500FHT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
5. Adjust the desired time per ad by either sliding your finger or touching and holding your finger the minus (-) area to decrease, or plus(t) area to incr.!?,2R. te 1111111111;LIIIII.111111101111111.011 Plt.,3e note the aajustment cannot be made wan one sliding action, the siding action must be done continuously in the minus (-) or plus (+) area. After flashing for a certain period of time, the "0" symbol lights up permanently. Lighting up of "0" symbol continuously indicates that the function is activated. he timer cay only be set for the cooking ones already in use. Repeat the above procedures for the other ooking zones for which you wish to set the imer. imer cannot be adjusted unless the cooking 1 one and the temperature value for the ooking zone are selected. hen the timer is activated, only the set time 1 or the selected cooking zone will appear on he timer display. Deactivating the timer Once the set time is over, the hob will automatically turn off and give an audible warning. Press any key to silence the audio warning. Turning off the timers earlier If you turn off the timer earlier, the hob will carry on operating at the set temperature until it is turned off. You can turn the timer off in two different ways: 1-Turning off the timer by dropping its value down to "00": 1. Select the cooking zone you want to turn off. 2. Touch "0" key to select the timer of the relevant cooking zone. 3. Decrease the value until "00" appears on the timer display by touching the adjustment area or by sliding your finger across the area. "0" symbol flashes on the cooking zone display for a certain time period and then it turns off permanently and the timer is canceled. 2-Turning off the timer by pressing timer key for 3 seconds: 1. Select the cooking zone you want to turn off. 2. Touch "0" key to select the timer of the relevant cooking zone. 3. Touch "0" key for about 3 seconds. "0" symbol flashes on the cooking zone display for a certain time period and then it turns off permanently and the timer is canceled. Keep warm function (if any) You can use this function to keep your meal warm after the cooking process is completed. The keep warm function may be used in two different ways: with and without setting the timer. Activating the keep warm function without setting the timer 1. Select the cooking zone that has been set to a certain temperature and you want to use for keeping warm. 2. Touch "i.21" key to activate the keep warm function for the relevant cooking zone. he cooking zone will go on operating at -Lir" low temperature. and "u" symbols appear on the cooking zone display. Activating the keep warm function by setting the timer El tht IIIIIIIIIIIIIIIIIIIIIIIII 1 Select the desired cooking zone for which the temperature and timer has been set, and you are planning to run the keep warm function. 2. Touch "t2r" key to activate the keep warm function for the relevant cooking zone. "-LP symbol appears on the cooking zone display. The cooking zone will keep on operating at the set temperature throughout the set time period. When the time is over, it switches to keep warm function and starts operating at low temperature. "u" symbol appears on the cooking zone display. Turning off the keep warm function 1. If the timer is activated, select the cooking zone for which the keep warm function is activated. Touch ""tir"" key to turn off the keep warm function. The cooking zone will continue operating with the previous time and temperature setting. 21/EN