Beko HQC64401 User Manual - Page 14

Control panel • Specifications 0 Main key - ON/OFF key Keylock Temperature setting/Increasing timer Temperature setting/Decreasing timer CD ** Dual/Triple cooking zone selection key * Enable/disable timer *" Enable/disable cooking zone QJ Cooking zone selection controls 0 Cooking zone display (temperature setting 0 ... 9) Dual/triple cooking zone operation LED (Cooking zone display) *Timer display (there are 4 LEDs for 4 different cooking zones) This unit is controlled over the touch control unit. Each operation you make on your touch control will be confirmed by an audible signal if your touch control unit is equipped with a timer. lways keep the control panels clean and dry. Humidity and dirt can cause problems in unctions. (*) If your hob is equipped with a timer. If your hob is equipped with these functions In models with a clock Graphics and figures are for informational purposes only. Actual appearance or functions may vary. Turning on the hob Touch the " 0" key on control panel for 1 second. Cooking zone displays illuminate. The hob is ready for use now. You can select different cooking zones within the following 10 seconds. Other controls are not allowed to function when main key "Q" is being operated. " " and all the relevant decimal points will flash in all cooking zone displays. If no operation is performed within 10 seconds, the hob will automatically return to Standby mode. If you press main key " 0" for longer than 2 seconds, the hob will turn off and return to Standby mode. Selecting the cooking zones • 14/EN