Beko HQC64401 User Manual - Page 17

2. Touch " n" and " •," keys simultaneously for at least 2 seconds. 3. Then, touch " N/" key once again. » " appears on all cooking zone displays as long as the Child lock is activated. " will disappear when the lock is deactivated successfully. Timer function * This feature facilitates cooking for you. You will not have to attend the hob continuously during the cooking process and the cooking zone will turn off automatically at the end of the time you have selected. Timer provides following features: Touch control can command to maximum 4 cooking zone timers and one alarm cooking timer assigned at the same time. All timers can only be used in operation mode. Timer as an alarm Alarm timer operates independently from other cooking zones. Therefore, it is not important whether a cooking zone is selected or not. 1. Touch "0' key to enable the alarm timer. "00" and " 0,1iP,." will appear on the timer display and a dot will appear on the lower right side. Thus, alarm timer is activated. 2. Then, set the desired time value by touching " n " and " Nf" keys. 3. Timer will start to countdown after you have made the time setting. » When the time is over, an audible alarm will sound. Touch any key on the touch control panel to silence the audible alarm. Cooking zone timer: The cooking zone timers cay only be set for the cooking zones that are activated. 1. First turn on the hob and then enable the desired cooking zone. (cooking zone must be set to a value between 1 and 9) 2. As in the alarm timer, enable the cooking zone e" MI timer by touching " key. "00" and " " will appear on the timer display and a dot will appear on the lower right side. Thus, cooking zone timer is activated. 3. You must touch " 8" key for a second time in order to enable cooking zone timer. Now you can assign the timer. 4. Set the desired time value by touching " n" and "u" keys. To set the hob timers: 1. After enabling the first cooking zone timer, touch the " 0" key again. The control will turn clockwise towards the next active cooking zone assigned to the timer. Assignment proposal will be shown with a flashing "El" LED. 2. Set the desired time value by touching " n" and "u" keys. 3. Timer activated for the cooking zone which was set first is indicated with a continuously flashing " Er LED. • More timers can be assigned for other active cooking zones by touching the "9" key once again. • After 10 seconds, timer display reverts back to the timer that will end first. • " ,-,a10.k" LEDs that illuminate continuously on the timer display indicate the timer that is currently counting down. • You can display the values set for cooking zone timers and egg timer by changing the position of " & key. A flashing front right " El" LED always shows an assignment. If no LED is flashing, value of the egg timer will be displayed on the timer screen. Disabling the timers: First you must display the timer by changing the position of the " 9' key until the timer appears. This value can later be cancelled in 2 different ways: • By decreasing the value step by step to "00" by touching "•," key. • By touching " n" and " N/" keys simultane- ously for half second until "00" appears on timer display. When the time is over, an audible alarm will sound. Touch any key on the touch control panel to silence the audible alarm. 17/EN