Beko WMB714422 User Manual - Page 38
of the filter, place a large vessel in front
View all Beko WMB714422 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
If the product has an emergency water draining hose, in order to drain the water: a Pull the emergency draining hose out from its seat b Place a large container at the end of the hose. Drain the water into the container by pulling out the plug at the end of the hose. When the container is full, block the inlet of the hose by replacing the plug. After the container is emptied, repeat the above procedure to drain the water in the product completely. c When draining of water is finished, close the end by the plug again and fix the hose in its place. d Turn and remove the pump filter. If the product does not have an emergency water drain hose, in order to drain the water: a. In order to collect the water to flow out of the filter, place a large vessel in front of the filter. b. Turn and loosen the pump filter until water starts to flow (counterclockwise). Fill the flowing water into the container you have placed in front of the filter. Always keep a piece of cloth handy to absorb any spilled water. c When the water inside the product is finished, take out the filter completely by turning it. 4 Clean any residues inside the filter as well as fibers, if any, around the pump impeller region. 5. Replace the filter. 6. If the filter cap is composed of two pieces, close the filter cap by pressing on the tab. If it is one piece, seat the tabs in the lower part into their places first, and then press the upper part to close. 38 / EN Washing Machine / User's Manual