Beko WMB714422 User Manual - Page 43

Problem Reason Solution Detergent residue in the detergent drawer. (**) Detergent is put in wet drawer. ŠŠDry the detergent drawer before putting in detergent. Detergent has gotten damp. ŠŠKeep detergents closed in an environment free of humidity and do not expose them to excessive temperatures. Water pressure is low. ŠŠCheck the water pressure. The detergent in the main wash compartment got ŠŠCheck the holes and clean if they are wet while taking in the prewash water. Holes of clogged. the detergent compartment are blocked. There is a problem with the detergent drawer valves. ŠŠCall the Authorized Service Agent. Detergent might be mixed with the softener. ŠŠDo not mix the softener with detergent. Wash and clean the dispenser with hot water. Regular drum cleaning is not applied. ŠŠClean the drum regularly. For this procedure, please see "4.7.2 Cleaning the loading door and the drum". Too much foam forms inside Improper detergents for the washing machine are ŠŠUse detergents appropriate for the the product. (**) being used. washing machine. Excessive amount of detergent is used. ŠŠUse only sufficient amount of detergent. Detergent was stored under improper conditions. ŠŠStore detergent in a closed and dry location. Do not store in excessively hot places. Some meshed laundry such as tulle may foam too ŠŠUse smaller amounts of detergent for much because of their texture. this type of item. Detergent is put in the wrong compartment. ŠŠPut the detergent in the correct compartment. Softener is being taken early by the product. ŠŠThere may be problem in the valves or in the detergent dispenser. Call the Authorized Service Agent. Foam is overflowing from Too much detergent is used. the detergent drawer. ŠŠMix 1 tablespoonful softener and ½ l water and pour into the main wash compartment of the detergent drawer. ŠŠPut detergent into the product suitable for the programmes and maximum loads indicated in the "4.6.2 Programme and consumption table". When you use additional chemicals (stain removers, bleaches and etc), reduce the amount of detergent. Laundry remains wet at the Excessive foam might have occurred and ŠŠUse recommended amount of end of the programme. (*) automatic foam absorption system might have detergent. been activated due to too much detergent usage. (*) The product does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the product and to its surrounding environment. Laundry should be rearranged and re- spun. (**) Regular drum cleaning is not applied. Clean the drum regularly. See 4.7.2 A CAUTION: If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself. 43 / EN Washing Machine / User's Manual