Beko WR862441 User Manual - Page 32
Changing the selections after programme has started, 6.14 Cancelling the programme, 6.15 End
View all Beko WR862441 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
4.6.13 Changing the selections after programme has started Switching the machine to pause mode Press the Start / Pause button to switch the machine to pause mode while a programme is running. The light of the step which the machine is in starts flashing in the Programme Follow-up indicator to show that the machine has been switched to the pause mode. Also, when the loading door is ready to be opened, Loading Door light will also illuminate continuously in addition to the programme step light. Changing the auxiliary function, speed and temperature Depending on the step the programme has reached, you can cancel or activate the auxiliary functions; see, "Auxiliary function selection". You may also change the speed and temperature settings; see, "Spin speed selection" and "Temperature selection". C If no change is allowed, the relevant light will flash for 3 times. Adding or taking out laundry 1. Press Start / Pause button to switch the machine to pause mode. The programme follow-up light of the relevant step during which the machine was switched into the pause mode will flash. 2. Wait until the Loading Door can be opened. 3. Open the Loading Door and add or take out the laundry. 4. Close the Loading Door. 5. Make changes in auxiliary functions, temperature and speed settings if necessary. 6. Press Start / Pause button to start the machine. 4.6.14 Cancelling the programme To cancel the programme, turn the Programme Selection knob to select another programme. Previous programme will be cancelled. End / Cancel light will flash continuously to notify that the programme has been cancelled. Pump function is activated for 1-2 minutes regardless of the programme step, and whether there is water in the machine or not. After this period, your machine will be ready to start with the first step of the new programme. C Depending on the step where the programme was cancelled in, you may have to put detergent and softener again for the programme you have selected anew. 4.6.15 End of programme "End" appears on the display at the end of the programme. 1. Wait until the loading door light illuminates steadily. 2. Press On / Off button to switch off the machine. 3. Take out your laundry and close the loading door. Your machine is ready for the next washing cycle. 32 / EN Washing Machine / User's Manual