Belkin F1DK102P User Manual - Page 13
Switch to Port 2-2 - no scroll lock
UPC - 722868463338
View all Belkin F1DK102P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
USING YOUR SWITCH You can switch directly to any port by entering the Switch port number you wish to use. For example, if you press "SCROLL LOCK", "SCROLL LOCK", "2", the computer on port 2 will be selected. ++ Switch to Port 2-(2) AutoScan Mode In AutoScan mode, the Switch remains on one port for eight seconds before switching to the next. This time interval cannot be changed. To enable AutoScan mode, press "SCROLL LOCK", "SCROLL LOCK", "S". Note: There is no mouse or keyboard control in this mode by design, in order to prevent errors. If it were enabled, the user could move the mouse or use the keyboard while the KVM Switch is switching to the next port. This could interrupt communication between the computer and Switch that might cause erratic mouse movement, or result in errant display of characters when using the keyboard. To disable AutoScan mode, press the space bar. 10