Belkin F1DS104P User Manual - Page 11

P73778-C-SOHO-man-9_02.qxd 9/18/02 5:17 PM Page 18 INSTALLATION Connect the Computer 5. Using a standard USB A to B cable (we recommend Belkin part number F1D9101-XX), insert the end with the B-type connector to the KVM Switch. Insert the other end of the cable with the A-type connector to an available port on your USB computer or USB hub that is attached to your computer. See Fig. 12. 6. Your computer should recognize the KVM Switch and will automatically install the HID USB driver if not already installed on your computer. INSTALLATION Audio and Microphone Connections Recommended Belkin OmniView KVM Cables for SOHO Series with Audio are included with Belkin part number F1D9101-XX. Note: Speakers and microphones are not required for use of your KVM Switch. Connect the Audio 7. Using the audio cable attached to your speakers, connect the male 3.5mm plug to the lime audio jack in the "Console" section of the KVM Switch. See Fig. 13. Fig. 12 18 Fig. 13 8. Using the mic cable attached to your microphone, connect the male 3.5mm plug to the pink mic jack in the "Console" section of the KVM Switch. See Fig. 13. 19