Belkin F8Z295 User Manual - Page 25
Belkin F8Z295 Manual
View all Belkin F8Z295 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
SPECIFICATIONS Table of Contents sections 1 2 3 4 5 6 On-Board Microphones • • Microphone Type: Electret condenser microphone (ECM), unidirectional, approximately 50 dB sensitivity Gain Settings: off: +6 dB; low: +24 dB; high: +36 dB; auto: +35 dB to 0 dB AC Power Supply Requirements Voltage: +5VDC ± 5% Current: 1A recommended. 1A to 3A power supplies are acceptable. Power: 5W recommended. 5W to 15W power supplies are acceptable. Headphone/Line Output Nominal Headphone Impedance: 32Ω Monitor level control may need to be increased when using 600Ω headphones. Output Power: 40mW per channel Maximum Output Voltage: 900mVrms DC Plug Polarity: Ring is negative, tip is positive. GoStudio 23
23
GoStudio
Table of Contents
SECTIONS
1
2
3
4
5
6
SPECIFICATIONS
AC Power Supply Requirements
•
Voltage: +5VDC ± 5%
•
Current: 1A recommended. 1A to 3A power supplies are acceptable.
•
Power: 5W recommended. 5W to 15W power supplies are
acceptable.
DC Plug Polarity: Ring is negative, tip is positive.
On-Board Microphones
•
Microphone Type: Electret condenser microphone (ECM),
unidirectional, approximately
50 dB sensitivity
•
Gain Settings:
off
: +6 dB;
low
: +24 dB;
high
: +36 dB;
auto
: +35 dB
to 0 dB
Headphone/Line Output
•
Nominal Headphone Impedance: 32Ω
•
Monitor level control may need to be increased when using 600Ω
headphones.
•
Output Power: 40mW per channel
•
Maximum Output Voltage: 900mVrms