BenQ BenQ IL420 Interactive Digital Signage User Manual - Page 27
Connecting the touch module (IL series only)
![]() |
View all BenQ BenQ IL420 Interactive Digital Signage manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Connection 27 Connecting the touch module (IL series only) Connect the USB (type B) jack on the display to the USB port of a computer using the supplied USB cable. The touch module of the display supports easy Plug-and-Play operation. There is no need to install additional drivers on the computer. IL420/IL460 IL650 • Avoid blocking the touch screen frame (where sensors are located) when initiating the touch module. • It is highly recommended that you connect the display to the PC or laptop directly. Avoid connecting the display to a face plate device which may cause failures in touch operations. • If any ghost image occurs, please try to un-plug and then re-plug all USB cables. If the failure image still exists, use another USB type B to A cable.
![](/manual_guide/products/benq-benq-il420-interactive-digital-signage-user-manual-4dbec50/27.png)