BenQ BenQ IL420 Interactive Digital Signage User Manual - Page 42
PAP Setting, Picture Position, Display Wall, H. Monitors, H. Position, Frame Comp., Power On Delay
![]() |
View all BenQ BenQ IL420 Interactive Digital Signage manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
42 The OSD (On-Screen Display) menu PAP Setting (continued) • Picture Position: (PIP only) Changes the position of the sub picture. Upper Left Upper Right Lower Left Lower Right Display Wall Aspect • PAP is not available for all signal source combinations. See "Supported PAP input signal combination" on page 77 for more information on supported combinations. • In PAP mode, only sound from the active picture will be available. • H. Monitors/V. Monitors: Sets the number of displays used in the horizontal/vertical direction. • H. Position/V. Position: Sets the horizontal/vertical position of the display wall matrix. • Frame Comp.: Adjusts images near the display edges for optimal demonstration across the display wall. • LED: Turns the power indicator on the display on or off. • Power On Delay: Choose to enable or disable a sequence in turning on the screen matrix. If enabled, the display will turn on with a maximum of 10-second delay. Sets the picture's aspect ratio. • Wide Zoom: Enlarges to fill screen with minimum distortion. • Zoom: Enlarges the picture, keeping the same aspect ratio. • Full: Enlarges the picture horizontally to fill the screen when the picture source is 4:3 (Standard definition). When the picture source is 16:9 (High definition), it displays in the same 16:9 aspect ratio. • 4:3: Displays all picture source in 4:3 aspect ratio. • Full 1: Enlarges the picture to fill the screen in the vertical direction, keeping the same aspect ratio. A black frame may appear around the picture. • Full 2: Enlarges the picture to fill the screen. • Real: Displays the picture in its original number of dots.
![](/manual_guide/products/benq-benq-il420-interactive-digital-signage-user-manual-4dbec50/42.png)