BenQ DCP10 DCP10 User Manual - Page 11
Connecting the Power, Connect to a Computer, or remote control to switch DCP10 to computer mode.
View all BenQ DCP10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ENGLISH Connecting the Power Connect the power adapter to a standard 100V~240V AC power outlet. The unit automatically turns on once the power is connected. Power adapter Power cord Wall outlet Connect to a Computer Locate the RGB (VGA) output port of the computer or laptop and connect it to RGB INPUT port of DCP10. The video signal from the RGB INPUT port is streamed to RGB and DVI-I OUTPUT port. - To display computer image, press Camera/PC button on the control panel or remote control to switch DCP10 to computer mode. - For laptop to output display image, use the keyboard command (FN+F5) to switch between the display modes. For different command, please refer to your laptop manual. RGB cable Desktop Laptop 9
ENGLISH
9
Connecting the Power
Connect the power adapter to a standard 100V~240V AC power outlet. The unit
automatically turns on once the power is connected.
Power adapter
Power cord
Wall outlet
Connect to a Computer
Locate the RGB (VGA) output port of the computer or laptop and connect it to RGB INPUT
port of DCP10. The video signal from the RGB INPUT port is streamed to RGB and DVI-I
OUTPUT port.
- To display computer image, press Camera/PC button on the control panel
or remote control to switch DCP10 to computer mode.
- For laptop to output display image, use the keyboard command (FN+F5)
to switch between the display modes. For different command, please refer
to your laptop manual.
RGB cable
Desktop
Laptop