BenQ DCP10 DCP10 User Manual - Page 9
Making the Connections, Set the TV-RGB Switch Setting, Connect to a Monitor or Projector, Switch
View all BenQ DCP10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
ENGLISH Making the Connections Before making the connection, make sure the power of all devices are turned off. If you are not sure on where to connect, simply follow the illustrated connections below and also refer to the user manual of the device you are connecting the DCP10 with. Set the TV-RGB Switch Setting The TV-RGB switch determines the display output selection. Switch it to RGB (right) to output signal using RGB/DVI-I connection and TV (left) to output signal using RCA connection. (see fig. 1.4 # 6) Switch DCP10 Port Display Device Port RGB RGB OUTPUT RGB INPUT TV DVI-I OUTPUT To RS232/CVBS (use RS-232/CVBS cable) DVI-I INPUT VIDEO IN Connect to a Monitor or Projector Locate the RGB (VGA) input port of the graphics display device and connect it to RGB OUTPUT port of DCP10. Make sure the TV/RGB switch is set to RGB. RGB cable Projector CRT monitor 7 LCD monitor