BenQ DCP10 DCP10 User Manual - Page 12
Connect to a Computer via USB, Connect an External Microphone, Make sure the USB Flash Drive switch
View all BenQ DCP10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
ENGLISH Connect to a Computer via USB Locate the USB port of the computer or laptop and connect it to USB port of DCP10. This enables you to use DCP10 as a USB Camera or to transfer the captured pictures/videos from the memory and to computer. Also see "Transfer File from DCP10 to PC". Make sure the USB Flash Drive switch (see fig. 1.2 #1) is set to the left . Desktop USB cable Connect an External Microphone Laptop Plug a 3.5mm mono microphone to port. The built-in microphone on the control panel will be disabled when an external microphone is connected. The recorded audio will be in monophonic sound. Microphone 10
ENGLISH
10
Connect to a Computer via USB
Locate the USB port of the computer or laptop and connect it to USB port of DCP10. This
enables you to use DCP10 as a USB Camera or to transfer the captured pictures/videos
from the memory and to computer. Also see “Transfer File from DCP10 to PC”.
Make sure the USB Flash Drive switch (
see fig. 1.2 #1)
is set to the
left .
USB cable
Desktop
Laptop
Connect an External Microphone
Plug a 3.5mm
mono microphone to
port. The built-in microphone on the control panel
will be disabled when an external microphone is connected. The recorded audio will be in
monophonic sound.
Microphone