BenQ MS513 MS513, MX514, MW516 User Manual - Page 45
Personalizing the projector menu display, Select the lamp saver mode
View all BenQ MS513 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Personalizing the projector menu display The On-Screen Display (OSD) menus can be set according to your preferences. The following settings do not affect the projection settings, operation, or performance. • Menu display time in the SYSTEM SETUP: Advanced > Menu Settings menu sets the length of time the OSD will remain active after your last key press. The time length ranges from 5 to 30 seconds in 5-second increments. Use / to select a suitable time frame. • Menu position in the SYSTEM SETUP: Advanced > Menu Settings menu sets the OSD position in five locations. Use / to select a preferred position. • Language in the SYSTEM SETUP: Basic menu sets your familiar language for the OSD menus. Use / to select your language. • Reminder Message in the SYSTEM SETUP: Advanced > Menu Settings menu sets whether to display reminder messages on screen. Use / to select your desired setting. • Splash Screen in the SYSTEM SETUP: Basic menu sets a preferred logo screen to be displayed during projector start-up. Use / to select a screen. Select the lamp saver mode • Using the remote control. Press Smart Eco and Highlight Lamp mode and press / to select Normal/ Economic/Smart Eco. • Using the OSD menu. 1. Press Menu/Exit and then press / until the SYSTEM SETUP: Advanced menu is highlighted. 2. Press to highlight Lamp mode and press Mode/Enter. The Lamp Settings page displays. 3. Highlight Lamp mode and press / to select Normal/Economic/Smart Eco. The lamp brightness vary from the different lamp mode,see the description list in table below. Lamp mode Description Normal 100% lamp brightness. Economic Smart Eco 80% lamp power consumption. This is default setting. Lamp power consumption will save from 30% to 100% dynamically by detecting the content brightness level. If the Economic mode is selected, the light output will be reduced and result in darker projected pictures. Operation 45