BenQ PL460 User Manual - PH460 & PL460 - Page 11

Setting up the display 11 Setting up the display Mounting the display You can install the display on a vertical surface with a suitable wall mounting bracket or on a horizontal surface with the optional desktop stands. Please pay attention to the following notes during installation: • This display should be installed by at least two adult persons. Attempting to install this display by only one person may result in danger and injuries. • Refer the installation to qualified technicians. Improper installation may cause the display to fall or malfunction. Installing the display on a wall 1. Place a clean, dry and lint-free cloth on a flat, horizontal and object-free surface. Make sure that the size of the cloth is larger than the display. 2. Gently lay the display on the cloth with the LCD screen facing down. 3. Remove the desktop stands from the display if installed. 4. Identify the wall mounting screw holes on the back of the display as shown in the illustration. 400mm (15.75") *Screw type: M6 400mm (15.75") 5. Install the wall mounting bracket on the display and attach the display to the wall according to the mounting bracket's instructions. The length of the LCD display screw should exceed the thickness of the wall mounting bracket by at least 10 mm. Make sure that all screws are tightened and secured properly. (Recommended torque: 470 635N•cm). The mounting means should be strong enough to bear the weight of the display. Thickness of the wall mounting bracket 10 mm (0.39")