BenQ PL460 User Manual - PH460 & PL460 - Page 19

Connection, Connecting audio/video signals

Get BenQ PL460 PDF manuals and user guides View all BenQ PL460 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Connection 19 Connection Connecting audio/video signals Pay attention to the following notes when you connect cables: • Please turn off all devices. • Familiarize yourself with the audio/video ports on the display and the devices you want to use. Be aware that incorrect connections may adversely affect picture quality. • Do not remove cables from the ports by pulling the cable itself. Always grasp and pull the connectors at the end of the cable. • Ensure that all cables are fully inserted and firmly seated. Connecting the VGA input 1. Connect the VGA IN jack on the display to the VGA output jack on a computer using a D-Sub (15-pin) cable. 2. Connect the computer's audio output jack to the AUDIO IN (AUDIO1) jack on the display using a suitable audio cable. 3. To view images from this input, press the VGA button on the remote control. RS-232C-OUT RS-232C-IN D-Sub (15-pin) cable Audio cable Computer The audio cable is not supplied and should be purchased separately.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
Connection
19
Connection
Connecting audio/video signals
Pay attention to the following notes when you connect cables:
• Please turn off all devices.
• Familiarize yourself with the audio/video ports on the display and the devices you want
to use. Be aware that incorrect connections may adversely affect picture quality.
• Do not remove cables from the ports by pulling the cable itself. Always grasp and pull
the connectors at the end of the cable.
• Ensure that all cables are fully inserted and firmly seated.
Connecting the VGA input
1.
Connect the
VGA IN
jack on the display to the VGA output jack on a computer using
a D-Sub (15-pin) cable.
2.
Connect the computer’s audio output jack to the
AUDIO IN (AUDIO1)
jack on the
display using a suitable audio cable.
3.
To view images from this input, press the
VGA
button on the remote control.
The audio cable is not supplied and should be purchased separately.
D-Sub (15-pin) cable
Audio cable
Computer