BenQ PL460 User Manual - PH460 & PL460 - Page 36

Control, Setting, RS-232C, IR Passthrough, Primary, Secondary, Network, Set Monitor

Get BenQ PL460 PDF manuals and user guides View all BenQ PL460 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

36 The OSD (On-Screen Display) menu Control Setting Network Settings Set Monitor ID • RS-232C/LAN: Sets a terminal to control the display. • IR Passthrough: Select it when multiple displays are connected via RS-232C cables. - Primary: Designate the display as the primary unit for remote control operation. Only this display will be operated by the remote control. - Secondary: Designate the display as the secondary unit. The display can not be operated by the remote control, and will only receive the control signal from the primary display via the RS-232 connection. See Network connection on page 27 for details. Assigns an ID number for the current display when multiple displays are connected. HDMI Control For use when under the RS-232C control mode. Uses the HDMI CEC (Consumer Electronics Control) industry standard protocol to share functionality between connected devices and the display. To transfer system commands, you need to use an HDMI cable to connect the display to a device equipped with HDMI CEC. Select On in this menu and you can operate the main functionalities on your display and the connected device with one remote control.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
The OSD (On-Screen Display) menu
36
Control
Setting
•
RS-232C
/
LAN
: Sets a terminal to control the display.
•
IR Passthrough
: Select it when multiple displays are connected via RS-232C
cables.
-
Primary
: Designate the display as the primary unit for remote control
operation. Only this display will be operated by the remote control.
-
Secondary
: Designate the display as the secondary unit. The display can
not be operated by the remote control, and will only receive the control
signal from the primary display via the RS-232 connection.
Network
Settings
See
Network connection on page 27
for details.
Set Monitor
ID
Assigns an ID number for the current display when multiple displays are
connected.
For use when under the RS-232C control mode.
HDMI
Control
Uses the HDMI CEC (Consumer Electronics Control) industry standard
protocol to share functionality between connected devices and the display. To
transfer system commands, you need to use an HDMI cable to connect the
display to a device equipped with HDMI CEC. Select
On
in this menu and you
can operate the main functionalities on your display and the connected device
with one remote control.