BenQ PU9730 DLP Projector User Manual - Page 21
Making Connections, Preparations, Connect to PC
View all BenQ PU9730 DLP Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
English Making connections Preparations When connecting a signal source to the projector, be sure to: 1. Turn off all equipment before making any connections. 2. Use only the correct type cables for each source with proper type plugs. 3. Ensure that all cable plugs are firmly fitted to the equipment jacks. Note that all cables shown in the following connection diagrams may not be supplied with the projector (See "Shipping contents" on page 7 Shipping contents). Most cables are commercially available from electronics stores. Connect to PC You may connect a PC to your projector with a DVI-D, HDMI, RGB or RGBHV (BNC) cable for projection, and connect an external display to your projector for concurrent viewing if the input is RGB signal. HD CONNECT/LAN 21