BenQ PU9730 DLP Projector User Manual - Page 54

Installing the optional color wheel, color wheel.

Get BenQ PU9730 DLP Projector PDF manuals and user guides View all BenQ PU9730 DLP Projector manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

English Installing the optional color wheel The projector comes with a bright-type color wheel installed, an additional color-type color wheel is optional. To replace the color wheel (located under the lamp cover adjacent to lamp 1) refer to the following guide. 1. Turn the power off and disconnect the projector from the power outlet.Turn off all connected equipment and disconnect all other cables. 4. Lift the color wheel in the direction shown. 5. Insert the new color wheel. 2. Remove the screws on the lamp cover and slide the lamp cover as shown. 6. Secure the retaining screws as shown, and then close the lamp cover. 3. Unscrew the retaining screws (x 4) on the color wheel. Storing Unused Color Wheel: Keep the unused color wheel in the zipper bag in which the 6-segment color wheel (not supplied) was packaged. This bag prevents dust from falling or collecting on the color wheel. 54

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
English
54
Installing the optional color wheel
The projector comes with a bright-type color wheel installed, an additional color-type color wheel
is optional. To replace the color wheel (located under the lamp cover adjacent to lamp 1) refer to
the following guide.
1. Turn the power off and disconnect the
projector from the power outlet. Turn off
all connected equipment and disconnect all
other cables.
2. Remove the screws on the lamp cover and
slide the lamp cover as shown.
3. Unscrew the retaining screws (x 4) on the
color wheel.
4. Lift the color wheel in the direction shown.
°
5. Insert the new color wheel.
°
6. Secure the retaining screws as shown, and
then close the lamp cover.
Storing Unused Color Wheel: Keep the unused color
wheel in the zipper bag in which the 6-segment color
wheel (not supplied) was packaged. This bag prevents
dust from falling or collecting on the color wheel.