BenQ PU9730 DLP Projector User Manual - Page 9
IO panel, HD Connect/Lan, 3D Sync Out, DVI-D, DisplayPort, Copmuter-1, Monitor Out, Computer-2R/Pr
View all BenQ PU9730 DLP Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English IO panel • HD Connect/Lan For connection to RJ45 Cat5/Cat6 Enthernet cable to input uncompressed high-definition video (HD), control signals. • 3D Sync Out Connection to 3D IR sync signal transmitter. • DVI-D Connection to DVI source. • HDMI Connection to HDMI source. • DisplayPort Connection to device or PC featuring DisplyPort. • Copmuter-1 15-pin VGA port for connection to RGB, component HD source, or PC. • Monitor Out Connection to other display equipment for concurrent playback display. • Computer-2(R/Pr, G/Y, B/Pb, H,V) Connection to RGB or YPbPr/YCbCr output signal with BNC type input terminal. • RS-232 Standard 9-pin D-sub interface for connection to PC control system and projector maintenance. • TRIGGER 3.5mm mini earphone jack, employs 350mA display relay to provide 12(+/-1.5)V output and short circuit protection. • USB Maintenance exclusive port for authorized maintenance personnel only. • WIRE Remote Connection to input Niles or Xantech compatible IR repeater system. Caution: Make sure the port is valid before inserting a wired remote controller. The remote controller may be damaged in case of an invalid port, e.g. a wired remote controller is connected to trigger output. 9