BenQ PW9620 DLP Projector User Manual - Page 53

screwdriver before removing it.

Get BenQ PW9620 DLP Projector PDF manuals and user guides View all BenQ PW9620 DLP Projector manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

English 1. Power off and unplug the projector power cord. Remove the lamp module to be replaced after it cools down and the temperature of its lamps and peripheral components falls. 4. Insert a new lamp according to orientation of the old one. 5. Cover the lamp cap by tightening the lamp screws with a screwdriver. 2. Loosen the screws holding the lamp cap with a screwdriver before removing it. 6. Cover the lamp cap and tighten 3. Loosen the screws holding the lamp with a screwdriver before removing it. • Pulling it too quickly may cause the lamp to break and scatter broken glass in the projector. To reduce the risk of injuries to fingers and damage to internal components, use caution when removing lamp glass that has shattered. • Do not place the lamp in locations where water might splash on it, children can reach it, near or above heat sources, or near flammable materials. • Do not insert your hand into the projector when the lamp is removed. If you touch the optical components inside, it could cause blurred images. • Please be careful to not over-tighten the screws. Loose screws may cause a bad connection, which could result in Downloaded From projmecatlofur-nmctainouna.l.com BenQ Manuals 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
English
53
1. Power off and unplug the
projector
power cord. Remove the lamp module to
be replaced after it cools down and the
temperature of its lamps and peripheral
components falls.
2. Loosen the screws holding the lamp cap with
a screwdriver before removing it.
3. Loosen the screws holding the lamp with a
screwdriver before removing it.
4. Insert a new lamp according to orientation
of the old one.
5. Cover the lamp cap by tightening the lamp
screws with a screwdriver.
6. Cover the lamp cap and tighten
•
Pulling it too quickly may cause the lamp to break and scatter broken glass in the projector. To reduce the risk of
injuries to fingers and damage to internal components, use caution when removing lamp glass that has shattered.
•
Do not place the lamp in locations where water might splash on it, children can reach it, near or above heat
sources, or near flammable materials.
•
Do not insert your hand into the projector when the lamp is removed. If you touch the optical components inside,
it could cause blurred images.
•
Please be careful to not over-tighten the screws. Loose screws may cause a bad connection, which could result in
malfunction.
Downloaded From projector-manual.com BenQ Manuals