BenQ PW9620 DLP Projector User Manual - Page 54
Installing the optional color wheel
View all BenQ PW9620 DLP Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
English Installing the optional color wheel The projector comes with a bright-type color wheel installed, an additional color-type color wheel is optional. To replace the color wheel (located under the lamp cover adjacent to lamp 1) refer to the following guide. 1. Turn the power off and disconnect the projector from the power outlet.Turn off all connected equipment and disconnect all other cables. 4. Lift the color wheel in the direction shown. 5. Insert the new color wheel. 2. Remove the screws on the lamp cover and slide the lamp cover as shown. 6. Secure the retaining screws as shown, and then close the lamp cover. 3. Unscrew the retaining screws (x 4) on the color wheel. Downloaded From projector-manual.com BenQ Manuals 54 Storing Unused Color Wheel: Keep the unused color wheel in the zipper bag in which the 6-segment color wheel (not supplied) was packaged. This bag prevents dust from falling or collecting on the color wheel.