BenQ W5000 User Manual - Page 38

English W20000-en.book Page 38 Monday, October 22, 2007 3:35 PM IRIS Lens Shift See "Adjusting contrast ratio via IRIS" on page 29 for details. See "Shifting the projection lens vertically" on page 12 for details. Display menu FUNCTION (default setting / value) DESCRIPTION Aspect Ratio (Anamorphic) There are several options to set the picture's aspect ratio depending on your input source. See "Selecting the aspect ratio" on page 30 for details. Keystone (0) Corrects any keystoning of the picture. See "Correcting picture distortion" on page 23 for details. Position (0) Overscan Adjustment (depends on the selected input source) Displays the position adjustment page. To move the projected picture, use the directional arrow keys. The values shown on the lower position of the page change with every key press you made until they reach their maximum or minimum. Conceals the poor picture quality in the four edges. You can also manually press / to decide how much to be concealed. Setting 0 means the picture is 100% displayed. The greater the value, the more portion of the picture is concealed while the screen remains filled and geometrically accurate. PIP PC & Component YPbPr Tuning Turns the PIP window on or off and makes related adjustments. See "Displaying more than one image source simultaneously" on page 32 for details. H.Size (0) Adjusts the horizontal width of the picture. Phase (0) Adjusts the clock phase to reduce picture distortion. Auto Adjusts the phase, and frequency automatically System Setup menu FUNCTION (default setting / value) Language (English) Splash Screen (BenQ logo) My Screen Projector Position (Floor Front) Auto Off (Disable) Sleep Timer (Disable) Background Color (Blue) DESCRIPTION Sets the language for the On-Screen Display (OSD) menus. See "Using the menus" on page 20 for details. Allows you to select which logo screen will display during projector start-up. Three options are available: BenQ logo screen, Blue screen, or My Screen. Captures and stores the projected picture as My Screen. See "Creating your own startup screen" on page 33 for details. The projector can be installed on a ceiling or behind a screen, or with one or more mirrors. See "Obtaining a preferred projected image size" on page 12 for details. Prevents unnecessary projection when no signal is detected for a long time. See "Setting Auto Off " on page 43 for details. Sets the auto-shutdown timer. The timer can be set to a value between 30 minutes and 3 hours. Allows you to choose the color of the background screen that will be displayed when there is no input signal detected. 38 Using the projector