BenQ W5000 User Manual - Page 4

English W20000-en.book Page 4 Monday, October 22, 2007 3:35 PM 5. Do not block the ventilation holes while the 9. Do not look straight into the projector lens projector is on (even in standby mode): during operation. It may harm your sight. - Do not cover the projector with any item; - Do not place the projector on a blanket, bedding or any other soft surface. 10. Do not operate the projector lamp beyond the 6. In areas where the mains power supply rated lamp life. Excessive operation of lamps voltage may fluctuate by ±10 volts, it is beyond the rated life could cause a lamp to recommended that you connect your break on rare occasions. projector through a power stabilizer, surge protector or uninterruptible power supply (UPS) as appropriate to your situation. 7. Do not step on the projector or place any objects upon it. 11. The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement. 8. Do not place liquids near or on the projector. Liquids spilled into the projector will void your warranty. If the projector does become wet, 12. This projector is capable of displaying disconnect it from the power point and call inverted images for ceiling mount installation. BenQ to have the projector repaired. Use only BenQ's Ceiling Mounting Kit for mounting. 4 Important safety instructions