BenQ W5000 User Manual - Page 39

English W20000-en.book Page 39 Monday, October 22, 2007 3:35 PM Menu Settings Input Source Auto Source Search (Off) Menu Display Time (15 sec) Sets the length of time the OSD will remain active after your last key press. The range is from 5 to 30 seconds in 5-second increments. Menu Position (Center) Sets the On-Screen Display (OSD) menu position. Selects an input source to be projected. See "Selecting an input source" on page 19 for details. Sets whether the projector searches automatically for input sources. If the source scan is On, the projector will scan for input sources until it acquires a signal. If the function is not activated, the projector selects the last used input source. Advanced Setup menu FUNCTION (default setting / value) DESCRIPTION Lamp Lamp Power (Normal) Selects the projector lamp between Normal and Whisper modes. Lamp Hours Shows the lamp hours information. See "Getting to know the lamp hour" on page 43 for details. Pattern Dust Filter High Altitude Mode (Off) Reset Lamp Timer Once the lamp is renewed, select Reset to return the lamp timer to '0'. See "Resetting the lamp timer" on page 46 for details. Grid Press ENTER to display the grid test pattern. It helps you adjust the image size and focus and check that the projected image is free of distortion. Color Bar Press ENTER to display the color bar test pattern. You can display this test pattern to check that the colors are to your liking. Dust Filter Hours Shows the dust filter hours information Reset Dust Filter Timer Resets the duster filter timer to '0'. See "To clean the filter" on page 42 for details. A mode for operation in areas like high altitude or high temperature. See "Operating in a high altitude environment" on page 31 for details. Password Key Lock Password (Off) Limits use of the projector to only those who know the correct password. See "Utilizing the password function" on page 21 for details. Change Password You will be asked to enter the current password before changing to a new one. See "Utilizing the password function" on page 21 for details. Locks the keys on the projector and remote control except POWER and EXIT. See "Locking control keys" on page 33 for details. Returns all settings to the factory preset values. Reset All Settings The following settings will still remain: Names of user modes, Keystone, Position, H.Size, Phase, Language, Projector Position, High Altitude Mode, Lamp, and Password. Using the projector 39